The Edgecore DCS810 switch is a programmable leaf or spine switch for large scale data centers. In a 1RU form factor, the switch provides line-rate L2 switching and L3 routing, deep packet inspection, and traffic load balancing etc, across the 32 x QSFP-DD ports that support up to 32 x 400 GbE connections. The DCS810 can be deployed as a leaf switch supporting 25/50/100 GbE to servers, routers etc. with 100/400 GbE uplinks, or as a spine switch supporting 100/400 GbE leaf and spine interconnects. This open network switch is loaded with the Open Network Install Environment (ONIE), which supports the installation of compatible Network Operating System (NOS) soſtware, including open source options and commercial NOS offerings.

The Edgecore DCS560 is a high-performance, low-latency switch for high-performance data centers.

Application Scenarios:

• Spine Switch

 A next-generation, highest-capacity switch for data center spine use case. Breakout options include 2 x 400G, 4 x 200G, and 8 x 100G 

 per port, with a maximum of 320 logical ports. Offers reduced cost and power per bit.Scalable and enables migration to 400G leaf 

 connectivity in data centers.

• AI/ML Clusters

 Standards-based (Ethernet) networking for AI/ML training, leveraging low latency and high-throughput RoCEv2.Reduces Job 

 Completion Time (JCT) using the cognitive routing and congestion management capabilities of the switch.Fully programmable 

 telemetry enables sophisticated on-chip applications for heightened network insight and efficient network management.

The Edgecore DCS520 is a spine switch for high-performance data centers. The switch provides line-rate L2 and L3 switching across the 64 x QSFP56-DD ports, each supporting 1 x 400G QSFP56-DD, 1 x 100G QSFP28, 1 x 40G QSFP+, or via breakout cables 2 x 200G (2 x 4 lanes 50G PAM4), 4 x 100G (4 x 2 lanes 50G PAM4), 2 x 50G (2 x 2 lanes 25G NRZ), 4 x 25G NRZ, or 4 x 10G NRZ. The DCS520 can be deployed as a spine switch supporting 100/400 GbE spine to spine or spine to leaf interconnects. This open network switch is loaded with the Open Network Install Environment (ONIE), which supports the installation of compatible Network Operating System soſtware, including the open source options Open Network Linux, plus commercial NOS offerings.

The Edgecore DCS510 is a spine switch for high-performance data centers. The switch provides line-rate L2 and L3 switching across the 32 x QSFP-DD ports, each supporting 1 x 400 GbE or 1 x 100 GbE, or via breakout cables 4 x 100 GbE or 4 x 25 GbE. The DCS510 can be deployed as a spine switch supporting 100/400 GbE spine interconnects. This open network switch is loaded with the Open Network Install Environment (ONIE), which supports the installation of compatible Network Operating System soſtware, including the open source options, plus commercial NOS offerings.

Powerful 10Gbps and Layer 3 Routing Solution for Enterprise Backbone and Data Center Networking PLANET SGS-6341 series is a Layer 3 Stackable Managed Gigabit Switch that provides high-density performance, Layer 3 static routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First). With 10Gbps uplink interfaces and switch stacking capability, the SGS-6341 series can handle extremely large amounts of data in a secure topology linking to an enterprise backbone or high- capacity servers. The powerful multicast routing and network security features make the SGS-6341 series perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications.

4xGigabit Combo + HOP3440S1232-4TP is a multi-port, high-standard Industrial Managed Ethernet Switch independently developed by Houper for industrial control. This product adopts industry-leading technical standards and can provide stable and reliable Ethernet transmission with high quality design and reliability. It offers and realizes Ethernet data exchange, convergence and longdistance optical transmission with efficient bandwidth and reliable fiber optic network solutions for users. 

320KVA CUMMINS DIESEL GENERATOR ,C320D5P WITH PS0602 CONTROLLER

The C320D5P diesel generator, part of the QSL9 series by Cummins, features the QSL9-G15 engine with 6 cylinders. Cummins has chosen the Stamford HCl444D model for the alternator of this generator. The Cummins controller PSO602is utilized for process control in the C320D5P diesel generator. This generator has an output voltage of 415 volts, operates at a frequency of 50 Hz, and is a three-phase diesel generator. The C320D5P diesel generator belongs to the SILENT TYPE category.

25KVA CUMMINS DIESEL GENERATOR ,C25D5P WITH PSO600 CONTROLLER

The C25D5P diesel generator, part of the X2.7 series by Cummins, features the X2.7T-G1 engine with 3 cylinders. Cummins has chosen the Stamford SOL2-M1 model for the alternator of this generator. The Cummins controller PSO600 is utilized for process control in the C25D5P diesel generator. This generator has an output voltage of 415 volts, operates at a frequency of 50 Hz, and is a three-phase diesel generator. The C25D5P diesel generator belongs to the SILENT TYPE category.

250KVA CUMMINS DIESEL GENERATOR ,C250D5P WITH PowerCommand 1.1 CONTROLLER

The C250D5P diesel generator, part of the QSB6.7 series by Cummins, features the QSB6.7-G17 engine with 6 cylinders. Cummins has chosen the Stamford S3L1D-K model for the alternator of this generator. The Cummins controller PowerCommand 1.1 is utilized for process control in the C250D5P diesel generator. This generator has an output voltage of 415 volts, operates at a frequency of 50 Hz, and is a three-phase diesel generator. The C250D5P diesel generator belongs to the SILENT TYPE category.

180KVA CUMMINS DIESEL GENERATOR ,C180D5P WITH PSO602 CONTROLLER

The C180D5P diesel generator, part of the QSB6.7 series by Cummins, features the QSB6.7-G14 engine with 6 cylinders. Cummins has chosen the Stamford S3L1D-G model for the alternator of this generator. The Cummins controller PSO602 is utilized for process control in the C180D5P diesel generator. This generator has an output voltage of 415 volts, operates at a frequency of 50 Hz, and is a three-phase diesel generator. The C180D5P diesel generator belongs to the SILENT TYPE category.

160KVA CUMMINS DIESEL GENERATOR ,C160D5P WITH PSO602 CONTROLLER

The C160D5P diesel generator, part of the QSB5.9 series by Cummins, features the QSB5.9-G2 engine with 6 cylinders. Cummins has chosen the Stamford S3L1D-F model for the alternator of this generator. The Cummins controller PSO602 is utilized for process control in the C160D5P diesel generator. This generator has an output voltage of 415 volts, operates at a frequency of 50 Hz, and is a three-phase diesel generator. The C160D5P diesel generator belongs to the SILENT TYPE category.

140KVA CUMMINS DIESEL GENERATOR ,C140D5P WITH PSO602 CONTROLLER

The C140D5P diesel generator, part of the QSB5.9 series by Cummins, features the QSB5.9-G1 engine with 6 cylinders. Cummins has chosen the Stamford S3L1D-E model for the alternator of this generator. The Cummins controller PSO602 is utilized for process control in the C140D5P diesel generator. This generator has an output voltage of 415 volts, operates at a frequency of 50 Hz, and is a three-phase diesel generator. The C140D5P diesel generator belongs to the SILENT TYPE category.