THERMAL OVERLOAD RELAY parts with part number LRD22 are overload relays for Schneider TeSys LRD range contactor.  The TeSys D range contactor is designed to make a motor starter. Such overload relays can be used with TeSys D contactors with a capacity of 9 to 38 amps. Such thermal differential overload relays detect excessive currents in motor lines. When excessive current is detected, the overload relay operates with the contactor to cuts off the power to the motor. This reduces damage to engine parts. The overload relay can set the trip current in the range of 16 to 24 amps.

The ClimaSys CC is a bipolar thermostat in the ClimaSys product category. This thermostat can adjust the temperature within the ranges of 0 to 60 °C in heating, cooling and ventilation systems. The temperature is displayed in Fahrenheit. The thermostat works with an input voltage of 250 volts and uses bimetal type. The type of contact and its combination is 1NO/NC (normally open and closed) and the contact resistance is 10 milliohms. The service life of this thermostat is 100,000 cycles. This thermostat is one of the most widely used equipment for activating fans in various systems and ventilating panels and devices. It is widely used in Schneider chillers in data centers. It is one of the spare parts of data center air conditioners.

The antenna is placed in a round and waterproof plastic housing. The body cover is arched, to prevent any rainwater, snow or other impurities penetrating inside the antenna. The mechanical structure is made of solid, anodized, and cast aluminum. It is designed to withstand strong winds. In addition, special thermal elements are used inside it, for automatic melting of ice and snow. The active antenna gets its amplification power through the coaxial cable and the time server itself. It has the ability to amplify weak signals, and remove unwanted noise. It is one of the best antennas for time servers in the world.

The hopf signal converter 4800 series for 35 mm rail mounting (EN 50 022) is a low-cost solution for the distribution/conversion of a variety of electrical and optical signals. You can choose DC or AC power supply units for the signal converter4800. The converter can convert RS422, RS232 and RS485 signals to fiber, and vice versa, or to each other. This module is widely used to transmit time server information over long distances with the help of multimode fiber optic and IRIG-B protocol. After transmission by fiber, you can convert it to IRIG-B protocols.

The HOP3412S1324-8TP has the leading ring network technology, supporting a variety of industrial redundant ring network protocol, any port can be a ring, support chain type, star type, double star type, ring type, tangent ring, intersecting ring,   coupling ring, ring network 50ms self-healing. This series of models have high reliability, high security and high manageability, ensure reliable transmission of key data, support remote management, and can manage cluster management with optical network NMS network management platform to achieve the whole process without blind point network management. HOP3412S1324-8TP industrial series products fully follow industrial product design and material. The shell uses aluminum alloy to enhance heat dissipation. 

The HOP3412S1314-4TP is a full Gigabit managed industrial PoE switch. it has 8*10/100/1000M PoE ports and 2*10/100/1000M RJ45 ports and 4*100/1000M SFP fiber slot ports , port 1-8 can supports IEEE 802.3af/atstandard POE power supply, single port POE power up to 15W, and the maximum POE output power is 30W(at-150W). As a POE power supply device, it can automatically detect and identify the electrical equipment that meets the standard and supply power through the cable. It can supply the POE terminal equipment, such as wireless AP, network camera, network telephone, industrial sensor and so on, to meet the demand for high density PoE power supply network environment. 

The HOP3412S136-1TP is a full gigabit industrial PoE fiber switch. It has 4*10/100/1000Base-T POE ports and 1*1000M RJ45 port and 1*100/1000Base-X SFP fiber slot ports. Port 1-4 can support IEEE 802.3af/at PoE standard, single-port PoE power up to 15W, and the maximum PoE output power of the host is 30W.      As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to PoE terminal device such as wireless AP, IP camera, industrial sensor through the network cable, and meet the network environment that needs high-density PoE power supply.

The HOP3412S136-2TX is a full gigabit industrial PoE fiber switch. It has 4*10/100/1000Base-T RJ45 ports and 2*100/1000Base-X SFP fiber slot ports. Port 1-4 can support IEEE 802.3af/at PoE standard, single-port PoE power up to 15W, and the maximum PoE output power of the host is 30W (at-60W). As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to PoE terminal device such as wireless AP, IP camera, industrial sensor through the network cable, and meet the network environment that needs high-density PoE power supply. 

The HOP3412S136-2TP is a full Gigabit managed industrial POE switch independently developed by Houper. it has 4*10/100/1000M POE ports and 2*100/1000M uplink SFP fiber slot ports. Port 1-4 can support IEEE 802.3af/at standard POE power supply, single port POE power up to 15W, and the maximum POE output power is 30W (at-60W). As a POE power supply device, it can automatically detect and identify the electrical equipment that meets the standard and supply power through the cable. It can supply the POE terminal equipment, such as wireless AP, network camera, network telephone, industrial sensor and    so on, to meet the demand for high density PoE power supply network environment. 

The HOP3308P device is an OLT control center with ePON technology for small projects. With 8 EPON ports and 4 10G uplinks and 4 1G copper uplinks and NMS, USB accesses, it enables a wide range of network features for various solutions. Houper OLT center is able to connect to various modems, switches and OLT with its reliability, stability and expandability. It supports all standard OLT protocols and provides many fast and easy features for programming and configuring the device. Among its other advantages, there is the reliable redundant power. Its small dimensions makes it very suitable and economical for industrial, home, corporate and organizational projects.

The HOP3408Y device is an OLT control center with GPON technology for industrial projects. With 8 GPON ports and 4 10G uplinks and 1 1G copper uplink and NMS accesses, it provides wide network features for various solutions. Houper OLT center is able to connect to various brands of modems, switches and OLT with its reliability, stability and expandability. It supports all standard OLT protocols and provides many fast and easy features for programming and configuring the device. Among its other advantages, there is the reliable redundant power. Its small dimensions makes it very suitable and economical for industrial, home, corporate and organizational projects.

Huawei SmartAX MA5800 X7 OLT is 19inch, with 6U height 7 service slots, 200G throughput per slot, support GPON, 10G PON, 40G/100G PON ready. The single-frame can meet 32,000 households with 100-megabit non-blocking access and enjoy 4K TV. To ensure 100 Mbps non-blocking access per user in the 4K era, Huawei MA5800-X7 new-generation OLT should have ultra-wideband, large-capacity 4K video access aggregation capability, and single-slot switching capacity needs to reach 400 Gbps, which means that each slot Can support 16x10G PON, 4x40G PON and 2x100G PON non-blocking access, the entire OLT system can achieve 320,000 home 100M non-blocking enjoy 4K TV.