The Edgecore DCS240 is spine switch for high-performance data centers. The switch provides line-rate L2 and L3 switching across the 32 x QSFP56-DD ports, each supporting 1 x 400 GbE or 1 x 100 GbE, or via breakout cables 2 x 200GbE, 4 x 100 GbE, or 4 x 25 GbE. The DCS240 can be deployed as a spine switch supporting 100/400 GbE spine interconnects. This open...

The Edgecore DCS510 is a spine switch for high-performance data centers. The switch provides line-rate L2 and L3 switching across the 32 x QSFP-DD ports, each supporting 1 x 400 GbE or 1 x 100 GbE, or via breakout cables 4 x 100 GbE or 4 x 25 GbE. The DCS510 can be deployed as a spine switch supporting 100/400 GbE spine interconnects. This open network switch is...

The Edgecore DCS520 is a spine switch for high-performance data centers. The switch provides line-rate L2 and L3 switching across the 64 x QSFP56-DD ports, each supporting 1 x 400G QSFP56-DD, 1 x 100G QSFP28, 1 x 40G QSFP+, or via breakout cables 2 x 200G (2 x 4 lanes 50G PAM4), 4 x 100G (4 x 2 lanes 50G PAM4), 2 x 50G (2 x 2 lanes 25G NRZ), 4 x 25G NRZ, or 4 x...

The Edgecore DCS560 is a high-performance, low-latency switch for high-performance data centers. Application Scenarios: Spine Switch  A next-generation, highest-capacity switch for data center spine use case....

The Edgecore DCS810 switch is a programmable leaf or spine switch for large scale data centers. In a 1RU form factor, the switch provides line-rate L2 switching and L3 routing, deep packet inspection, and traffic load balancing etc, across the 32 x QSFP-DD ports that support up to 32 x 400 GbE connections. The DCS810 can be deployed as a leaf switch supporting...