Dell PowerStore 9200T
The Dell PowerStore 9200T is a second-generation model in the PowerStore family, built for enterprise block, file, and container workloads. Its unified all-flash NVMe architecture brings centralized data management and straightforward storage expansion. Powerful processors, high-capacity memory, and scalable expansion make it a good fit for environments that demand consistent capacity, performance, and availability.
PowerStore simplifies storage operations through an active/active architecture, automated resource management, and integrated software capabilities. It supports block, file, and container workloads on a single platform and scales vertically and horizontally as needs change. Automated workflows and integration with management frameworks further simplify how storage resources are provisioned and managed.
Architecture and Processing Power
The PowerStore 9200T uses four Intel Xeon Scalable processors. Together they provide 112 cores at 2.2 GHz and, paired with 2560 GB of memory, deliver the processing and memory resources enterprise workloads require. Each appliance consists of two active/active nodes that keep storage resources continuously accessible.
The storage design is built on an all-flash NVMe architecture with dual-port NVMe SSDs. NVMe over Fabric connectivity is supported over Fibre Channel and TCP networks. This architecture is engineered for high performance and low latency across a wide range of workloads. Permanent data reduction, intelligent automation, active resource balancing, predictive analytics, and non-disruptive software and hardware upgrades all help keep the storage environment optimized.
Storage Capacity and Expansion
Each PowerStore 9200T appliance supports up to 93 drives. The base enclosure comes in a 2U chassis and houses two active/active nodes plus 25 NVMe drive slots in the 2.5-inch form factor. For more capacity, 2U expansion enclosures add 24 NVMe drives each in the same 2.5-inch form factor. Each appliance supports up to three expansion enclosures.
The 9200T includes four NVRAM modules. Every base and expansion enclosure also ships with two redundant power supplies. Data protection is handled by Dynamic Resiliency Engine (DRE) technology, which guards the system against simultaneous failure of multiple drives. Each appliance supports up to two Mezzanine cards and four I/O modules.
Maximum effective capacity for the 9200T base enclosure is 1.29 PBe, which corresponds to 323 TB or 293 TiB of raw capacity. Maximum effective capacity per appliance is 5.90 PBe, with a corresponding raw capacity of 1,430 TB or 1,300 TiB. At the cluster level, effective capacity reaches up to 23.60 PBe.
These effective capacities assume an average data reduction ratio of 5:1 and tolerance of two drive failures. Actual capacity therefore depends on data type, usage pattern, and operating environment. Maximum logical capacity per appliance is 8 EB, and raw capacity is based on the base capacity stated by the drive manufacturer. Final capacities also depend on the drive sizes available at purchase.
In capacity calculations, TB is decimal and equals 1000×1000×1000×1000 bytes, while TiB is binary and equals 1024×1024×1024×1024 bytes. That is why the capacity of a set of drives differs between TB and TiB.
Supported Drives
PowerStore 9200T supports NVMe TLC SSDs with a PCIe interface in 1.92 TB, 3.84 TB, 7.68 TB, and 15.36 TB capacities, in both the base and expansion enclosures. A 750 GB NVMe Optane SCM SSD is also supported in the base enclosure.
The drives use a 512-byte sector size and are Self-Encrypting Drives (SED). Drives validated to FIPS 140-2 or FIPS 140-3 Level 2 standards are available as an option. QLC media are specific to Q models and should not be considered a usable drive type in the 9200T.
Connectivity and Communication Ports
PowerStore 9200T connects to hosts and the storage network through Mezzanine cards and I/O modules. File connectivity is provided over NFS/SMB, while block host connectivity runs over Fibre Channel and iSCSI. Across all types, the maximum number of host-side ports is 24.
Per appliance, support includes up to 16 16/32Gb Fibre Channel ports, up to 24 10GBase-T/iSCSI ports, up to 24 10/25 GbE/iSCSI ports, and up to 8 100 GbE/iSCSI ports. Backend connectivity expands through four 100GbE QSFP ports, and four onboard ports come standard.
Network module options include a four-port 10GBASE-T module with copper connectivity for IP/iSCSI traffic, a four-port 25 Gb/s optical module supporting 25GbE or 10GbE, and a two-port 100 Gb/s module with QSFP connectivity. The four-port optical module connects to an Ethernet switch using SFP+ optical or Twinax copper connectivity.
For Fibre Channel block connectivity, a four-port 32 Gb/s module offers a choice of 16 Gb/s or 32 Gb/s. It uses multimode optical SFP and OM2, OM3, or OM4 cables to connect directly to a Host HBA or FC switch.
The ENS24 drive expansion enclosure supports 24 2.5-inch NVMe SSDs and uses a 100 GbE QSFP controller interface. Each node connects to one side of each of the two redundant GbE port pairs, so drives stay accessible if a node or port fails.
Cluster Scalability and System Limits
Multiple PowerStore appliances can be combined into a horizontally scalable cluster, with up to four appliances in a Scale-out cluster. At the cluster level, support includes up to 96 host-side ports, 2,048 iSCSI sessions, and 2,000 Initiator IDs.
Support also covers up to 1,024 Initiator IDs per Initiator Group and up to 32,000 Volume and vVols units per cluster. The final drive count and cluster raw capacity depend on the limits of each appliance. Clusters can mix various PowerStore models.
Storage Protocols and File Services
On the block side, supported protocols include iSCSI, Fibre Channel (FCP SCSI-3), NVMe/FC, and NVMe/TCP. VMware Virtual Volumes (vVols) 2.0 is also available, enabling vVols over FC, NVMe/FC, iSCSI, and NVMe/TCP.
For file access, the system supports NFS v3, NFS v4, NFS v4.1, and NFS v4.2, along with CIFS (SMB 1), SMB 2, SMB 3.0, SMB 3.02, and SMB 3.1.1. File transfer over FTP and SFTP is also available.
Beyond the core protocols, the system provides Access-based Enumeration (ABE) for SMB, Address Resolution Protocol (ARP), Lock Manager (NLM) management in versions v1 to v4, Home Directory access in SMB, and Microsoft DFS service as a Standalone Root Server.
Network and communication management covers management and data ports with IPv4 or IPv6, Fail Safe Networking (FSN), Network Status Monitor (NSM), ICMP, VLAN (IEEE 802.1q), and time synchronization via NTP Client. The feature set also includes SNMP v2c and v3, Kerberos Authentication, LDAP, NT LAN Manager (NTLM), Network Information Service (NIS), and Microsoft Entra ID SSO.
Management, Automation, and Resource Optimization
PowerStore Manager is the primary tool for managing the appliance and its storage resources, while Infrastructure Observability adds cloud-based storage analytics. The suite simplifies resource control with Thin Provisioning, Dynamic Resiliency Engine (DRE), data reduction through Zero Detect, Deduplication and Compression, and Quality of Service management.
Quality of Service (QoS) manages service quality across Block, File, and vVols resources. The File Top Talkers tool provides real-time file performance analysis, and the management software also includes Capacity Accounting, proactive assistance, and support for remote communication, online chat, and service request logging.
Local Data Protection
Local protection includes encryption based on SED drives, with either self-managed key management or an external key manager. Local point-in-time copies, including Snapshots and Thin Clones, retain data copies at specified times. The system also supports immutable and secure Snapshots.
The base software suite includes AppSync Basic, File Level Retention (FLR), and Dell Common Event Enabler along with the AntiVirus Agent (CEPA), all supporting local data protection and retention policies.
Data Replication, Recovery, and Migration
For protection at other sites, PowerStore supports native synchronous and asynchronous replication of block data. Capabilities also include asynchronous vVol replication, synchronous block Metro Volume replication for VMware, Windows, and Linux environments, and native synchronous and asynchronous file replication.
In synchronous file replication scenarios, a witness at a third site enables automatic service failover (Auto-failover). Native integration with PowerProtect DD lets you manage local or multi-site backups directly through PowerStore.
For migration, native block data migration is supported from Unity, Unity XT, PS Series, SC Series, VNX2, VMAX3, and XtremIO arrays, as well as third-party arrays. Native file data migration is supported for Unity, Unity XT, and VNX2 arrays.
Integration with Virtualization and Container Infrastructure
For virtualization management, Dell Virtual Storage Integrator (VSI) for VMware vSphere handles provisioning, management, and cloning. The OpenStack Cinder driver provisions and manages block Volumes in OpenStack environments. VMware Site Recovery Manager (SRM) integration manages Failover and Failback and supports disaster recovery.
The platform also supports VMware VAAI and VASA interfaces, the vRO plugin for PowerStore, the Container Storage Interface (CSI) plugin, the Ansible module, and Terraform Provider. These tools help integrate storage with virtualized and container environments and automated workflows.
Security, Encryption, and Compliance
Data at Rest Encryption (D@RE) in PowerStore uses Self-Encrypting Drives (SED) for NVMe SSD and NVMe SCM SSD media. All drives are SED type, and the NVRAM cache is encrypted as well. A KMIP-compatible external key manager can be used for D@RE.
Security features include multi-factor authentication via RSA SecurID, Multiparty Authorization, immutable and secure Snapshots, native SHA2 certificates, and IPv6 USGv6-R1 certification. Drives validated to FIPS 140-2 or FIPS 140-3 Level 2 standards are available as an option.
TLS 1.3 is enabled by default, while TLS 1.1 and older versions are disabled by default, though TLS 1.1 can be enabled optionally. For systems with STIG hardening, multi-factor authentication with Common Access Card (CAC) or Personal Identity Verification (PIV) cards is also supported. PowerStoreOS 3.5 has been hardened under STIG to meet U.S. Department of Defense security requirements.
Power Consumption and Electrical Specifications of the Base Enclosure
The PowerStore 9200T runs on single-phase power with an input voltage of 200–240 VAC ±10% at 47 to 63 Hz. Power values are stated for typical operation at 26°C and maximum conditions at 40°C. Line current is a maximum of 8.1 A at typical temperature and 9.8 A at maximum temperature at 200 V.
Typical power consumption at 26°C is a maximum of 1597 W or 1629.6 VA. At 40°C, consumption reaches a maximum of 1919.4 W or 1958.6 VA. Typical heat dissipation at 26°C is a maximum of 5.75 × 10⁶ J/hr, equivalent to 5,449 Btu/hr, and at 40°C it is a maximum of 6.91 × 10⁶ J/hr, equivalent to 6,549 Btu/hr.
The power factor at full load and 200 VAC is at least 0.95. Cold-state inrush current is 45 Apk per power cable at each line voltage, and warm-state startup surge current is 120 Apk. Each power supply is protected by a 20 A fuse, and power input uses an IEC320-C20 connector. Hold-up time after a momentary power interruption is at least 10 ms, and current sharing between power supplies runs within a ±5% tolerance of full load.
These values assume a fully populated enclosure with power supplies, drives, and I/O modules. The PowerStore 9200T is ENERGY STAR certified.
ENS24 Expansion Enclosure Specifications
The ENS24 expansion enclosure holds 24 2.5-inch drives and uses single-phase power at 100 to 240 VAC ±10% and 47 to 63 Hz. Typical current at 26°C is a maximum of 4.8 A at 100 VAC and 2.4 A at 200 VAC. At 40°C, current reaches a maximum of 6.4 A at 100 VAC and 3.2 A at 200 VAC.
Typical power consumption is a maximum of 470 W or 510 VA, and maximum power consumption is 636 W or 663 VA. The power factor at full load is at least 0.92. Typical heat dissipation is a maximum of 1.69 × 10⁶ J/hr (1,604 Btu/hr), and maximum heat dissipation is 2.29 × 10⁶ J/hr (2,170 Btu/hr).
Inrush current is a maximum of 82 A for a half-cycle of the line per power cable at 200 VAC, and startup surge current is a maximum of 100 Apk up to 125 µSec. Each power supply is protected by a 15 A fuse, and each power zone uses an IEC320-C14 coupler for power input. Hold-up time after a momentary power interruption is at least 10 ms.
The empty weight of the expansion enclosure is 27.2 kg or 60 lb, and its fully populated weight is 33.5 kg or 74 lb. It measures 2 NEMA units vertically, with a height of 8.89 cm, a width of 43.18 cm, and a depth of 65.30 cm.
Dimensions and Weight of the Base Enclosure
The PowerStore 9200T base enclosure measures 2 NEMA units vertically. Its empty weight is 35.80 kg or 79 lb, and its fully populated weight is 41.7 kg or 92 lb. Chassis dimensions are 8.72 cm high, 44.72 cm wide, and 79.55 cm deep.
Environmental Conditions and Operating Temperature Range
The recommended operating temperature range is 18°C to 27°C (64.4°F to 80.6°F), with a dew point of 15°C or 59°F. The permissible continuous operating range is 5°C to 35°C (50°F to 95°F), with relative humidity between 20% and 80%. The maximum dew point under continuous conditions is 21°C.
Within the permissible continuous range, data center energy optimization methods such as free cooling can be used, and equipment can run in this range without hourly restrictions. Above 950 m, the maximum allowable dry-bulb temperature drops by one degree Celsius for every 300 m of additional altitude.
Under exceptional, non-continuous conditions, operation between 35°C and 40°C is possible without direct sunlight, with a minimum dew point of -12°C, relative humidity of 8% to 85%, and a maximum dew point of 24°C. These conditions are limited to a maximum of 10% of annual operating hours. Between 35°C and 40°C, the maximum allowable dry-bulb temperature drops by one degree Celsius for every 175 m of additional altitude above 950 m.
The maximum allowable operating altitude is 3,050 m (10,000 ft), and the allowable temperature change rate is 20°C/hour (36°F/hour).
Summary
Dell PowerStore 9200T is a unified enterprise storage system from the second generation of the PowerStore family, supporting block, file, and container workloads in an all-flash NVMe architecture. With four Intel Xeon processors, 112 cores at 2.2 GHz, and 2560 GB of memory, it gives organizations high processing power and memory capacity. Each appliance uses two active/active nodes, up to 93 drives, and four NVRAM modules.
NVMe TLC drive support, 1.29 PBe of effective capacity for the base enclosure, up to 5.90 PBe per appliance and 23.60 PBe per cluster, and a range of FC and Ethernet ports make this system suitable for scalable enterprise infrastructures. Management, data reduction, local protection, replication, encryption, and integration with virtualization and container environments round out a comprehensive storage feature set on a single platform.