List of products by brand Edgecore

The Edgecore DCS240 is spine switch for high-performance data centers. The switch provides line-rate L2 and L3 switching across the 32 x QSFP56-DD ports, each supporting 1 x 400 GbE or 1 x 100 GbE, or via breakout cables 2 x 200GbE, 4 x 100 GbE, or 4 x 25 GbE. The DCS240 can be deployed as a spine switch supporting 100/400 GbE spine interconnects. This open network switch is loaded with the Open Network Install Environment (ONIE), which supports the installation of compatible Network Operating System soſtware, including the open source options, plus commercial NOS offerings.

The Edgecore DCS510 is a spine switch for high-performance data centers. The switch provides line-rate L2 and L3 switching across the 32 x QSFP-DD ports, each supporting 1 x 400 GbE or 1 x 100 GbE, or via breakout cables 4 x 100 GbE or 4 x 25 GbE. The DCS510 can be deployed as a spine switch supporting 100/400 GbE spine interconnects. This open network switch is loaded with the Open Network Install Environment (ONIE), which supports the installation of compatible Network Operating System soſtware, including the open source options, plus commercial NOS offerings.

The Edgecore DCS520 is a spine switch for high-performance data centers. The switch provides line-rate L2 and L3 switching across the 64 x QSFP56-DD ports, each supporting 1 x 400G QSFP56-DD, 1 x 100G QSFP28, 1 x 40G QSFP+, or via breakout cables 2 x 200G (2 x 4 lanes 50G PAM4), 4 x 100G (4 x 2 lanes 50G PAM4), 2 x 50G (2 x 2 lanes 25G NRZ), 4 x 25G NRZ, or 4 x 10G NRZ. The DCS520 can be deployed as a spine switch supporting 100/400 GbE spine to spine or spine to leaf interconnects. This open network switch is loaded with the Open Network Install Environment (ONIE), which supports the installation of compatible Network Operating System soſtware, including the open source options Open Network Linux, plus commercial NOS offerings.

The Edgecore DCS560 is a high-performance, low-latency switch for high-performance data centers.

Application Scenarios:

• Spine Switch

 A next-generation, highest-capacity switch for data center spine use case. Breakout options include 2 x 400G, 4 x 200G, and 8 x 100G 

 per port, with a maximum of 320 logical ports. Offers reduced cost and power per bit.Scalable and enables migration to 400G leaf 

 connectivity in data centers.

• AI/ML Clusters

 Standards-based (Ethernet) networking for AI/ML training, leveraging low latency and high-throughput RoCEv2.Reduces Job 

 Completion Time (JCT) using the cognitive routing and congestion management capabilities of the switch.Fully programmable 

 telemetry enables sophisticated on-chip applications for heightened network insight and efficient network management.

The Edgecore DCS810 switch is a programmable leaf or spine switch for large scale data centers. In a 1RU form factor, the switch provides line-rate L2 switching and L3 routing, deep packet inspection, and traffic load balancing etc, across the 32 x QSFP-DD ports that support up to 32 x 400 GbE connections. The DCS810 can be deployed as a leaf switch supporting 25/50/100 GbE to servers, routers etc. with 100/400 GbE uplinks, or as a spine switch supporting 100/400 GbE leaf and spine interconnects. This open network switch is loaded with the Open Network Install Environment (ONIE), which supports the installation of compatible Network Operating System (NOS) soſtware, including open source options and commercial NOS offerings.