English 
Turkish
العربية
فارسی
WORLDWIDE DELIVERY
24/7 HELP CENTER
SHOP WITH CONFIDENCE
SAFE PAYMENT
Edgecore Datacenter switch DCS240 (AS9726-32DB) with 32*400G
$25,200.00
The Edgecore DCS240 is spine switch for high-performance data centers. The switch provides line-rate L2 and L3 switching across the 32 x QSFP56-DD ports, each supporting 1 x 400 GbE or 1 x 100 GbE, or via breakout cables 2 x 200GbE, 4 x 100 GbE, or 4 x 25 GbE. The DCS240 can be deployed as a spine switch supporting 100/400 GbE spine interconnects. This open network switch is loaded with the Open Network Install Environment (ONIE), which supports the installation of compatible Network Operating System soſtware, including the open source options, plus commercial NOS offerings.
Key Features and Benefits
- Cost-effective, open network switch for data center fabric.
- QSFP56-DD switch ports, each supporting 1 x 400 GbE, or via breakout cables 2 x 200G GbE or 4 x 100 GbE.
Upper 16 ports support up to 24 W per transceiver.
Lower 16 ports support up to 14 W per transceiver.
- Incorporates Broadcom Trident 4 switch series silicon for non-blocking line-rate performance.
- 1 RU form factor.
- Supports hot/cold aisles with front-to-back and back-to-front airflow SKUs.
- All ports on front; PSUs and fans accessible from rear.
- Hot-swappable, load-sharing, redundant 1500 W PSUs.
- 5+1 redundant, hot-swappable fan modules.
- Hardware switch pre-loaded with Open Network Install Environment (ONIE) for automated loading of compatible open source and commerical NOS offerings.
Interfaces
Models
Ports
Switch Ports: 32 x QSFP56-DD 400 GbE Power Budget: 24 W on upper 16 ports, 14 W on lower 16 ports
Management Ports on Port Side:
1 x RJ-45 serial console
1 x Micro USB console port
• Note: When both console ports are connected, only one is active. The Micro USB port has a higher priority.
1 x RJ-45 1000BASE-T management
2 x SFP+ 10G management
1 x USB 3.0 storage port
Supported Transceivers and Cables:
40GBASE-SR4/LR4
40G-DAC Cable
100GBASE-SR4/CWDM4/LR4
100G-DAC/AOC Cable
400GBASE-FR4/ZR
400G-DAC/AOC Cable
Key Componets
Switch Silicon: BCM56880 Trident 4 12.8 Tb/s
CPU Modules:
Processor: Intel® Pentium® Processor D1519 4-cores 1.5 GHz
SPI Flash: 32MB x 2
Memory: DDR4 SO-DIMM 8GB x 2 with ECC support
Storage: m.2 NVMe SSD 64GB x 1 MLC
Performance
Switching Capability: 12.8 Tbps
Forwarding Rate: 5.4 Bpps
Jumbo frames support up to 9416 bytes
Packet Buffer Size: 132 MB SmartBuffer
MAC Addresses: max. 384K
Physical and Environmental
Dimensions (WxDxH): 43.84 x 59 x 4.35 cm (17.26 x 23.23 x 1.71 in.)
Weight: 11.85 kg (26.12 lb), with 2 PSUs and 6 fans installed
Fans: Hot-swappable 5 + 1 redundant fans
Storage Temperature: -40°C to 70°C ( -40°F to 158°F)
Operating Temperature:
(FtoB): 0°C ~ 45°C (32°F ~ 113°F)
(BtoF): 0° C ~ 35° C (32°F to 95°F)
Operating Humidity: 5% ~ 95% non-condensing
Soſtware
Switch is loaded with Open Network Install Environment (ONIE)
soſtware installer
Compatible with the following NOS options: open source options, plus commercial NOS offerings.
Power
PSUs: 2 redundant, load-sharing, hot-swappable AC
AC input ranges:
100-180VAC at 50-60Hz (1000 W max.)*
200-240VAC at 50-60Hz (1500 W max.)
*200-240VAC may be required for power redundancy under full loading.
AC Inlet: IEC 60320 C14
Power Consumption
Min. (w/o transceivers): 396 W@100VAC/386 W@240VAC
Max. (w/o transceivers): 714 W@100VAC/653 W@240VAC
Regulatory
Emissions:
EN 55032:2015+AC:2016, Class A
EN 61000-3-2:2014, Class A
EN 61000-3-3:2013
FCC Class A
Immunity:
EN 55035:2017
EN 55024:2010+A1:2015
IEC 61000-4-2/3/4/5/6/8/11
Safety:
UL (CSA 22.2 No 62368-1 & UL62368-1)
CB (IEC/EN60950-1 & IEC/EN 62368-1)
Environmental:
GR63-CORE (Pre-test)
RoHS-2.0 Compliant
Electrical and Electronic Equipment (WEEE Directive 2002/96/EC)
Datacenter switch
100 Items
Data sheet content
Switch-Router
- Type of switch
- Data center
- Number of ports
- 48 , 32 , 128 , 64 , 96
- Port speed
- 25G , 40G , 100G , 400G , 200G
- Uplink port
- 8 , 16 , 32
- Uplink Port speed
- 100G , 400G , 200G
- type of ports
- QSFP56-DD
- type of uplink ports
- QSFP56-DD
- Layer of switch
- Layer 2 , Layer 3
- IP version
- IPV4 , IPV6
- Switch power consumption
- 1000-1500W
- Switch Capacity
- 12.8T
- Redundant power and fan
- Modular design of power supply and fan , hot swappable , fan speed control and alarm detection
16 other products in the same category
Specifications
Switch-Router | |
|---|---|
| Type of switch | Data center |
| Number of ports | 48, 32, 128, 64, 96 |
| Port speed | 25G, 40G, 100G, 400G, 200G |
| Uplink port | 8, 16, 32 |
| Uplink Port speed | 100G, 400G, 200G |
| type of ports | QSFP56-DD |
| type of uplink ports | QSFP56-DD |
| Layer of switch | Layer 2, Layer 3 |
| IP version | IPV4, IPV6 |
| Switch power consumption | 1000-1500W |
| Switch Capacity | 12.8T |
| Redundant power and fan | Modular design of power supply and fan, hot swappable, fan speed control and alarm detection |
The Edgecore DCS240 is spine switch for high-performance data centers. The switch provides line-rate L2 and L3 switching across the 32 x QSFP56-DD ports, each supporting 1 x 400 GbE or 1 x 100 GbE, or via breakout cables 2 x 200GbE, 4 x 100 GbE, or 4 x 25 GbE. The DCS240 can be deployed as a spine switch supporting 100/400 GbE spine interconnects. This open network switch is loaded with the Open Network Install Environment (ONIE), which supports the installation of compatible Network Operating System soſtware, including the open source options, plus commercial NOS offerings.