The 641-0838-Z is a 24V power supply with a current of 2A and a power of 45W. The 641-0838-Z power supply is used in the Schneider brand INROW ACRC 301S cooler to generate 24 VDC from the 240 VAC input. Thanks to the switching system, the dimensions of the power source are very small (compared to linear power sources). Only two very small heat sinks have been used...

Actuator w491-0521 works as damper valve driver in INROW ACRC 602P cooler. It can disconnect, connect, and control the floating point. Its working voltage range is between 120 and 230 VAC. Some features of W491-0521 actuator are as following: brushless DC motor - no wear and failure, constant running time, independent of load, constant torque in the entire...

The ClimaSys CC is a bipolar thermostat in the ClimaSys product category. This thermostat can adjust the temperature within the ranges of 0 to 60 °C in heating, cooling and ventilation systems. The temperature is displayed in Fahrenheit. The thermostat works with an input voltage of 250 volts and uses bimetal type. The type of contact and its combination is 1NO/NC...

The continuous and accurate measurement of temperature and humidity is very important due to the high sensitivity of data centers environment to temperature and humidity. Therefore, with very accurate measuring devices, the necessary signals are constantly given to the system for the required controls. The W0N-0297 humidity sensor is used in the Schneider brand...

The continuous and accurate measurement of temperature and humidity is very important due to the high sensitivity of data centers environment to temperature and humidity. Therefore, with very accurate measuring devices, the necessary signals are always given to the system for the required controls. The W0N-0865 humidity sensor is used in the Schneider brand INROW...

W0W1314 is a thermometer based on NTC thermal resistance, which is used to measure the ambient temperature of various INROWs, including Schneider INROWACRC301S and INROWACRC602P. This operating piece converts temperature changes into current changes that can be understood by electronic circuits. Since it has a length of 0.5 meters, it should be installed at a very...

W0W2818 is a thermometer based on NTC thermal resistance, which is used to measure the ambient temperature of various INROWs, including Schneider INROW ACRC301S and Schneider INROW ACRC602P. This operational component converts temperature changes into current changes that can be understood by electronic circuits. Since it has a length of 4 meters, it can be...

WOW3163 is a thermometer based on NTC thermal resistance, which is used to measure the ambient temperature of various INROWs, including Schneider INROWACRC301S and INROWACRC602P. This operating piece converts temperature changes into current changes that can be understood by electronic circuits. Since it has a length of 2.5 meters, it can be installed at a...

Schneider Won-0279 float level switch is a simple, passive and functional product that is used in various industries. This switch uses surface control devices. It has advantages such as simple structure, no complex circuit, and smaller volume than the general mechanical switch. One of the prominent features of the product is its suitable materials, and the...

Schneider relay RSB2A080B7 is used in chillers and data center chillers. This relay has two open and closed contacts, which are controlled by 24 VAC, and 50 and 60 Hz frequency. It can pass 8 A current at an ambient temperature from -40 to +40 °C. The operating voltage of the relay is 19.2 to 36 VAC. Its nominal insulation voltage is 400...

Schneider TeSys LRD with part number LRD4367 is a thermal overcurrent protection relay used to protect 55 kW three-phase motors at 400 V. This relay has a differential device that detects load and phase imbalance. The product has a thermal adjustment dial, a manual-automatic reset switch that also functions as a reset button, a test button to simulate thermal...

TeSys GV2 can be used for a variety of applications in industry, infrastructure and buildings. It should be noted that the GV2LE22 circuit breaker has also been used in data center chillers. The GV2LE22 motor circuit breaker is a device that integrates the process of breaking the low voltage circuit and thermal overload relays. The device is able to protect motor...

THERMAL OVERLOAD RELAY parts with part number LRD22 are overload relays for Schneider TeSys LRD range contactor.  The TeSys D range contactor is designed to make a motor starter. Such overload relays can be used with TeSys D contactors with a capacity of 9 to 38 amps. Such thermal differential overload relays detect excessive currents in motor lines. When...