This electric current is measured by a current transformer: by varying the level of water using a fill solenoid valve and due to the evaporation process, the current, and consequently steam production, can be modulated. Due to evaporation, the level of water decreases and must therefore be topped up. As the steam produced does not carry mineral salts, the salt concentration in the water and therefore the conductivity increases, and has to be periodically diluted by draining part of it using the drain pump and replacing it with new water.

Stillness detection in ACIC (Advanced Composite Image Corporation) is a method used to identify and analyze stillness or lack of movement in composite images. This advanced feature enables a higher level of accuracy and efficiency in image analysis for various applications.

The system implemented in ACIC utilizes sophisticated algorithms to identify and track the absence of any significant motion within composite images, allowing for the detection of static objects or scenes. By effectively distinguishing stillness from motion, this capability enhances the corporation\'s ability to extract valuable information from images that may be critical for surveillance, security, or anomaly detection purposes.

ACIC\'s zone detection algorithm utilizes deep learning techniques to extract meaningful features from complex images. By assigning zones to specific regions of interest, the algorithm enables efficient detection and classification of objects within those zones. The system achieves high precision and recall rates by leveraging advanced neural network architectures and training on large-scale datasets.ACIC\'s zone detection software has demonstrated excellent performance in several domains, including surveillance, autonomous driving, and medical imaging.

HOP28129 is a high performance and cost-effective DVB-T modulator designed by Houper. It supports 24 or 16 FTA tuners input, maximum 256 IP input through GE1&GE2 and TS input for re-mux through 1 ASI ports. After BISS descrambling (version B), multiplexing and DVB-T modulating, it gives 8 non-adjacent carrier output and 8 IP (MPTS) output as mirror of carriers through GE1. 

HOP28129 is also characterized with high integrated level, high performance and low cost. It supports dual power supply (optional). This is very adaptable to newly generation broadcasting system.

Houper HOP28128 is an advanced and multifunctional device capable of converting IP and HDMI to RF signals. With very high picture and sound quality and network connectivity, the device is suitable for various environments such as hotels, restaurants, shopping malls and other public places. With the HOP28128, you can provide your viewers with a high-quality viewing experience and clear sound. Support for converting 32 (or 64) IP and 8 HDMI/AV channels to analog RF output, 2 to 4 gigabyte network ports, 32 to 64 RF TV channels such as PAL or NTSC or SECAM are among the capabilities of the device.

HOP28126 With the development of wide band and popularization of intellectualized service, digital TV service becomes diversified day by day with integrating live programs, entertainment, games, travel and business in one system. Hospitals, hotels and operators can only increase their brand visibility and customer satisfaction by providing more multimedia service and more enjoyable experience. 
Houper IPTV hotel system is open, compatible and easy to dock with the original hotel system. It provides the Live TV, VOD, room Service, Food and Beverage Service and other value-added services. Houper can also design system as per customers’ special requirements.

HOP28125 DTV head-end processor is the new generation of intelligent headend processing equipment. This 1-U case comes with 6 independent module slots. Each module can be configured individually based on the applications including encoding, decoding, trans-coding, multiplexing, descrambling and modulating processing and the combination of all these functions. It supports multiple input and output interfaces and signal formats. With its powerful performance and low cost, HOP28125 is especially adequate for the new generation CATV system.

HOP28124 DTV head-end processor is the new generation of intelligent headend processing equipment. This 1-U case comes with 6 independent module slots. Each module can be configured individually based on the applications including encoding, decoding, trans-coding, multiplexing, descrambling and modulating processing and the combination of all these functions. It supports multiple input and output interfaces and signal formats. With its powerful performance and low cost, HOP28124 is especially adequate for the new generation CATV system.

HOP28123 DTV head-end processor is the new generation of intelligent headend processing equipment. This 1-U case comes with 6 independent module slots. Each module can be configured individually based on the applications including encoding, decoding, trans-coding, multiplexing, descrambling and modulating processing and the combination of all these functions. It supports multiple input and output interfaces and signal formats. With its powerful performance and low cost, HOP28123 is especially adequate for the new generation CATV system.

HOP28121 transmitters are professional DVB-T/T2 transmission system which give sustained power output and with compact structure design to save space. It supports to work in SFN and MFN system. It can work with single-carrier mode and multi-carrier mode, and support single channel and broadband transmission. 

This transmitter has a very high linear and high reliability as it takes high power gain and high linear LDMOS tube amplifier module. 

With its good reputation at home and abroad, It transmitters have been widely used in HD/SD digital TV single transmit and broadcasting system.

HOP28120 Multi-Channel CI Receiver is a HOUPER’s new design which integrates demodulation and de-scrambler in one case to convert RF signals into TS output after re-mux. It is a 1-U case which supports Max 2 demodulation modules. The 2 CAMs/CIs accompanied in each demodulation module can decrypt programs inputting from encrypted RF, ASI and IP. The CAM requires NO unsightly external power cords, cables, or additional remote control device.BISS function is also embedded to descramble programs from any input.To meet customers’ various requirements, Each demodulation module of HOP28120 is also equipped with 1 ASI in and 16 IP inputs for re-mux, and output 1 MPTS and 16 SPTS with 1 ASI out port and 1 data port.

HOP28119 is a high performance 4K Encoder modulator designed by Houper. It integrates encoding (H.265/HEVC and H.264/AVC), multiplexing and modulating functions in one standard 1U case. It support two HDMI (2.0) channel UHD signal input (hot redundancy) for encoding, and also 2 ASI & 32 IP input for remux. To enhance the transport capacity, it combines 1 DVB-C/T carriers output with one RF port. It is also equipped with 4 ASI ports to mirror out RF carrier and IP port to output TS in 1* MPTS.