QSM11 Cummins Diesel Generator
  • QSM11 Cummins Diesel Generator

QSM11 Cummins Diesel Generator

Diesel Generator Cummins QSM11 is a powerful and high performance device that is used to provide electricity in industrial, commercial and residential places. It is produced using a powerful QSM11 diesel engine from Cummins. The QSM11 engine has a turbocharger system that improves its performance and efficiency. The generator has a power of 300 kW and 375 kVA in standby mode. In operational mode, its power reaches 270 kW, and 337-338 kVA. In addition, this generator has an intelligent control system that adjusts the amount of fuel consumed based on the load and working conditions. With its water cooling system and automatic oiling system, the generator protects the engine temperature and increases its service life.

Quantity

Overall, the Cummins QSM11 diesel generator is ideal for providing electricity in industrial, commercial and residential environments. With adjustable power output and optimal performance, this generator provides a reliable source of energy.

Power Command control is an integrated generator set control system providing governing, voltage regulation, engine protection and operator interface functions. Major features include:

  • Integral AmpSentry™ Protective Relay providing a full range of alternator protection functions that are matched to the alternator provided.
  • Battery monitoring and testing features and smart starting control system.
  • Three phase sensing, full wave rectified voltage regulation system, with a PWM output for stable operation with all load types.
  • Standard PCCNet™ and optional Echelon®LONWORKS® network interface.
  • Control suitable for operation in ambient temperatures from -40 °C to +70 °C (-40 °F to +158 °F) and altitudes to 5000 meters (13,000 feet).
  • Prototype tested; UL, CSA, and CE compliant.
  • InPower™ PC-based service tool available for detailed diagnostics.

Cummins Power Generation commercial generator sets are fully integrated power generation systems providing optimum performance, reliability and versatility for stationary standby and prime power

Features

Cummins heavy-duty engine - Rugged 4-cycle, industrial diesel delivers reliable power, low emissions and fast response to load changes.

Alternator - Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings, low waveform distortion with non-linear loads and fault clearing short-circuit capability.

Permanent magnet generator (PMG) - Offers enhanced motor starting and fault clearing short-circuit capability.

Control system - The PowerCommand®electronic control is standard equipment and provides total genset system integration including automatic remote starting/stopping, precise frequency and voltage regulation, alarm and status message display, AmpSentry™ protection, output metering, auto-shutdown at fault detection and NFPA 110 Level 1 compliance.

Cooling system – Standard cooling package provides reliable running, at the rated power level, at up to 52 °C (126 °F) ambient temperature.

Enclosures - Optional weather protective and sound attenuated enclosures are available.

Fuel tanks - Dual wall sub-base fuel tanks are also available.

NFPA - The genset accepts full rated load in a single step in accordance with NFPA 110 for Level 1 systems.

Warranty and service - Backed by a comprehensive warranty and worldwide distributor network.

QSM11%2001.jpg

QSM11%2003.jpg

QSM11%2004.jpg

QSM11%2005.jpg

QSM11%2006.jpg

Diesel Generator

Data sheet content

Diesel-engines

Control System
PCC2100
Available Voltages
110/190 - 120/240 - 230/400 - 115/200 - 127/220 - 240/416 - 115/230 - 139/240 - 254/440 - 120/208 - 220/380 - 277/480
Configuration
Cast iron , in-line 6 cylinder
Displacement
10.8 L (661.0 in3)
Fuel system
Direct injection: number 2 diesel fuel , fuel filter , automatic electric fuel shutoff
Standard cooling system
52 °C (125 °F) ambient radiator
Fuel Type
Diesel
Frequency (Hz)
60
Output power (kW / kVA)
300 kW - 270 kW / 375 kVA - (337- 338) kVA
Lube oil filter type
Spin-on combination full flow filter and bypass filters
Starting voltage
24 volt , negative ground
Stroke
147.1 mm (5.79 in)
Bore
125 mm (4.92 in)
Battery capacity
550 amps minimum at ambient temperature of 0 °C (32 °F) and above

Specifications

Diesel-engines

Control System PCC2100
Available Voltages 110/190 - 120/240 - 230/400 - 115/200 - 127/220 - 240/416 - 115/230 - 139/240 - 254/440 - 120/208 - 220/380 - 277/480
Configuration Cast iron, in-line 6 cylinder
Displacement 10.8 L (661.0 in3)
Fuel system Direct injection: number 2 diesel fuel, fuel filter, automatic electric fuel shutoff
Standard cooling system 52 °C (125 °F) ambient radiator
Fuel Type Diesel
Frequency (Hz) 60
Output power (kW / kVA) 300 kW - 270 kW / 375 kVA - (337- 338) kVA
Lube oil filter type Spin-on combination full flow filter and bypass filters
Starting voltage 24 volt, negative ground
Stroke 147.1 mm (5.79 in)
Bore 125 mm (4.92 in)
Battery capacity 550 amps minimum at ambient temperature of 0 °C (32 °F) and above