NETIO PowerBOX 3Px is a power socket device with 3 outputs controlled over a LAN. Each output can be switched off and on over the web, the NETIO cloud service, or with a mobile app. Open API enables integration into 3rd party systems using a wide range of protocols (http JSON, Modbus/ TCP, SNMP, MQTT, Telnet, ..). Each of the three power sockets can be independently controlled from the product web interface (switched off/on or power-cycled). To switch the outputs on in a sequence, a power-up delay interval can be configured for each output.

Time server 6842 is one of the most widely used time servers of the German Hopf brand. This time server has been installed in many projects. Time Server 6842 is installed in a modular way and has many expansion boards. Among these board is the antenna card. The antenna card has GPS and DCF77 antenna inputs. This board is updated based on the development of satellite frequencies for time servers. Versions 4505, 4507 to 4511 are add-on cards for the antenna card, which are replaced with pins on the antenna card. Devices similar to 6842 that do not have good satellite reception or their connection to the satellite has a problem, by replacing this board, the satellite connection will be established accurately and the system will be overhauled. Many collections are thinking of upgrading the firmware software on these cards, which is not accepted by HOPF and has caused many failures in the systems.

The HOU15324TM monitor is a 24-inch Houper industrial monitor and one of the touch resistant monitors with very high quality, fast response time and many features for industrial applications. The body of this monitor is made of aluminum metal. Its light intensity is 500 nits, its input ports are VGA and HDMI, and if requested, DVI. IP65 degree of protection has high resistance against water and dust penetration. Protection against EMC magnetic waves, 10-point touch sensitivity, MTBF above 80,000 hours, 1920x1080 resolution, 12V voltage consumption are some of the capabilities of this industrial monitor. This monitor has brackets that can be installed on the wall, on the table or without a frame for installation inside devices and equipment.

َall-in-one Thinlabs computer, which can be installed on a desk, wall, or inside a device, is an ideal solution for various applications in both office and industrial environments. This product is available in sizes of 19, 22, and 24 inches, with both touch and non-touch options. The processing power of this computer is ensured by a powerful Ryzen series processor and 8GB of DDR4 RAM. Additionally, this system comes standard with a 128GB m.2 2280 SSD, with the possibility of upgrading the memory to 64GB of RAM and 1TB of SSD storage. 

The original large display 4985 with NTP protocol consists of a 16x64 LED matrix. Two lines of 42 mm or one line of alphanumeric characters of 84 mm can be displayed on the matrix. The device can work as a large display for values such as network time, time difference and network frequency, which can be transferred from the hopf 7001 (RC) system with the 7515 (RC) board. The large display is equipped with a very accurate quartz clock, and can be synchronized with the DCF77 signal. The display also works with the NTP protocol as a time synchronizer.

The SyncServer® S650 uses our FlexPort technology to provide unmatched synchronization flexibility and performance. The GNSS-referenced S650 is easily adaptable for modern instrumentation systems and networks that require best-in-class synchronization performance for a wide range of applications.This modular time server combines the best of time and frequency instrumentation with unique flexibility and powerful network-based and security-hardened features. The timing output flexibility provides easy replication of precise and coherent output signals, eliminating the need for a signal distribution chassis.

The Exos X10 enterprise hard drives support up to 10 TB per drive, providing 25% more petabytes per rack. High storage densities allow the latest technology and greatest efficiencies to help catalyse the datasphere, enabling data centre architects and IT professionals to deliver trusted performance, rocksolid reliability, ironclad security and low TCO for demanding 24×7 operations.

The German STEGO heater has a heater with a small body and an internal fan, with part number CSL028. Using a PTC heating element, it prevents the formation of moisture inside electrical and control cabinets with high component density. Its touch-safe plastic case ensures the safety of users by providing heat protection. This product is widely used in instrument control boards, electronic and electrical equipment and systems, as well as data center cooling system boards. It is one of the widely used spare parts of Schneider brand datacenter cooling systems, including chillers.

The SyncServer® S650 uses our FlexPort technology to provide unmatched synchronization flexibility and performance. The GNSS-referenced S650 is easily adaptable for modern instrumentation systems and networks that require best-in-class synchronization performance for a wide range of applications.This modular time server combines the best of time and frequency instrumentation with unique flexibility and powerful network-based and security-hardened features. The timing output flexibility provides easy replication of precise and coherent output signals, eliminating the need for a signal distribution chassis.

CyberRow CRS 361 A product is a high-precision Inrow air conditioning unit specifically designed for cooling telecommunications, IT, and computer systems. This device is designed as a row unit and can be easily installed between server racks, making it ideal for data centers and IT rooms with hot and cold aisles. This German-made Inrow unit boasts a variety of features and is one of the most high-tech cooling systems for data centers in the world. The CRS 361 A air conditioning system is an ideal solution for creating optimal temperature and humidity in various environments. This device has a total cooling capacity of 32.6 kW and an airflow rate of 8,000 cubic meters per hour, providing high efficiency in maintaining optimal temperatures.

PowerBOX 4Kx is a LAN controlled power strip with 4 outputs. Each output can be switched off and on over the web, NETIO cloud service, or with a mobile app. Open API enables integration into 3rd party systems using a wide range of protocols (http JSON, Modbus/TCP, SNMP, MQTT, Telnet, ...). Power consumption (A, W, kWh, TPF, V, Hz) is measured on each power output separately with high precision. Each of four power sockets can be independently controlled from the product web interface (switched on/off or power-cycled). To switch the outputs on in a sequence, a power-up delay interval can be configured for each output.