HOP5750-30TP- 24port 2.5 Gigabit Access 6x10 Gigabit Uplink Switch
  • HOP5750-30TP- 24port 2.5 Gigabit Access 6x10 Gigabit Uplink Switch

HOP5750-30TP- 24port 2.5 G Access 6x10 G Uplink Switch

$650.00

The HOP5750-30TX switch has 24 ports with 2.5G of capacity, and 6 ports with 10G of capacity. This switch is made by HOUPER Company. It is one of the HOP5750 series switches that are sold in the network equipment market. This model of switch allows you to connect up to 2.5 gigabytes per port. As a Layer 3 switch, it has extremely high switching capacity, and supports multi-port reflective analysis and service flow-based image analysis. It also supports the mechanism of security filters such as ACL.

Quantity

Specifications:

  • 24*2.5G ports,6*10 Gigabit optical ports,10 Gigabit optical ports can beadaptive to Gigabit.
  • Ultra-high switching capacity, support full port wire-speed forwarding performance.
  • Support weak Layer 3 access, support full port hardware Layer 3 wire-speed forwarding performance.
  • High-performance low-power network processor, support for green Ethernet line sleep capability, low device power consumption.
  • Support IPv4/IPv6 dual-stack platform, support RIP/OSPF and other routing protocols.
  • Support VRRP/ERPS/MSTP/FlexLink/MonitorLink and other link redundancy and network redundancy protocols.
  • Support ACL security filtering mechanism, provide MAC, IP, L4 port and port level security control functions.
  • Support Ethernet OAM 802.3ag(CFM),802.3ah(EFM) and other Ethernet link detection mechanisms.
  • Supports remote user authentication based on Tacacs+/Radius, and supports Local user authentication.
  • Supports SP/WRR/SP+WRR priority algorithm to ensure the transmission of various priority traffic flows on demand.
  • Support IPv4/IPv6 static routing function.
  • Supports multi-port mirroring analysis and service flow-based image analysis.
  • Support static and flexible QinQfunction.
  • Support IPV4/6unicast routing in the policy, support flexible forwarding policy.
  • Supports CLI command line management based on serial port, Telnet, and SSHv2 mode.
  • Support RFC1213 SNMP network management.
  • Supports configuration management based on WEB pages.

Product Specifications

Physical Interface:

  • 10 Gigabit optical port: 6*10 Gigabit optical ports, 10 Gigabit optical port adaptive connection Gigabit optical, type SFP/SFP+/LC.
  • 2.5G port: 24*2.5G ports, the port can beadaptive10/100/1000M, type RJ45.
  • Console port: manage serial port, used for command line management, type RS232.

Working environment:

  • Operating temperature: -15C~55C.
  • Storage temperature: -40C~70C.
  • Relative humidity: 10%~90%, non-condensing.

Power consumption:

  • Power supply specifications: single power supply,AC.
  • Input power: AC: input 90~264V, 47~67Hz.
  • Power consumption of the whole machine: full load power consumption ≤22W, idle power consumption ≤ 13W.

Mechanical structure:

  • Chassis shell: metal shell, air-cooled heat dissipation.
  • Chassis size: dimensions (length * width * height) (mm) 440 * 210 * 44.
  • Installation: Standard 19 inch 1U rackmount installation.
switch
200 Items

Data sheet content

Switch-Router

Type of switch
General
Number of ports
24
Port speed
2.5G
Uplink port
6
Uplink Port speed
10G
type of ports
copper RJ45
type of uplink ports
SFP-10G
Power over Ethernet
No
Layer of switch
Layer 2 , Layer 3
IP version
IPV4 , IPV6
Switch Management
RFC1213 SNMP , WEB base , CLI Command line , Telnet , SSHv2
Switch power consumption
90-264 Vac , 24-45W
Operation temperature
-15 / +55 C

16 other products in the same category

Specifications

Switch-Router

Type of switch General
Number of ports 24
Port speed 2.5G
Uplink port 6
Uplink Port speed 10G
type of ports copper RJ45
type of uplink ports SFP-10G
Power over Ethernet No
Layer of switch Layer 2, Layer 3
IP version IPV4, IPV6
Switch Management RFC1213 SNMP , WEB base, CLI Command line , Telnet , SSHv2
Switch power consumption 90-264 Vac, 24-45W
Operation temperature -15 / +55 C