WORLDWIDE DELIVERY
24/7 HELP CENTER
SHOP WITH CONFIDENCE
SAFE PAYMENT
FS Datacenter switch N9510-64D with 64*400G
N9510-64D, 64-Port Ethernet L3 Data Center, 64 x 400Gb QSFP-DD, Broadcom Chip, FSOS Installed
The N9510-64D switch provides 64x 400GbE QSFP-DD ports in the 4U height, and each QSFP-DD port can be configured as 100/400GbE, or as 2x 200GbE via breakout cables. This data center switch is used jointly with TOR switch to meet design requirements of the spine-leaf three-tier network architecture.
This switch supports PFC, ECN to deliver low-latency, zero packet loss, non-blocking lossless Ethernet, and supports features like GR, BFD mechanisms to ensure normal operation when the network bears abundant services and heavy traffic.
N9510-64D is a next-generation high-performance, high-density box-type switch designed for artificial intelligence (AI), big data, high-performance computing, and distributed storage applications.
Specifications
Product Highlights
- Broadcom Tomahawk 4 BCM56990 Chip with High Throughput and Low Latency
- Support Ansible, NETCONF, Python, etc. Configuration and Automation Tools
- Flexible 100/200/400GbE Interface Speeds
- Support BGP4/BGP4+, REUP, GR, BFD
- Low-latency, Zero Packet Loss with PFC, ECN, RDMA over Converged Ethernet (RoCE)
- 2+2 Hot-swappable Power Supplies, 7+1 Smart Fans
- Support SPAN/RSPAN/ERSPAN for Visibility
- Support ACL, RADIUS, TACACS+, etc. for Security
- Support SNMP v1/v2c/v3, CLI, Telnet, SSH
Features
High-Performance Computing DC Network Solution
Suitable for IDC hosting, entertainment, education and scientific research, finance, Internet and other industries.
Broadcom Tomahawk 4 Chip Delivers High-performance and Large-capacity
Support higher computing power to meet the needs of various business scenarios with high computing power requirements.
BCM56990
Broadcom Chip
51.2 Tbps
Switching Capacity
1.2 μs
Low Latency
10,300 Mpps
Forwarding Rate
Dual Redundant Power Supplies and Smart Fans
Hardware-level redundancy protection to ensure business continuity and uninterrupted network.
7+1 Hot-swap Fans
Variable-speed fans for superior cooling, noise and power reduction
2+2 Dual AC PSU
PSUs can be removed/replaced without shutting down the system
Up to 120KM long-distance communication, simpler DCI interconnection
Support 400G ZR/ZR+ transceivers interconnection, reducing intermediate transmission equipment. DCI networking cost can be reduced by 15%-30%.
Millisecond Fault Detection and Recovery
Graceful Restart (GR) and Bidirectional Forwarding (BFD) mechanisms ensure that the network can achieve millisecond-level fault detection and recovery even when the network bears heavy traffic.
Data sheet content
Switch-Router
- Type of switch
- Data center
- Number of ports
- 2 , 64
- Port speed
- 100G , 400G , 200G
- Uplink port
- 64
- Uplink Port speed
- 400G
- type of ports
- QSFP-DD
- type of uplink ports
- QSFP-DD
- Power over Ethernet
- No
- Layer of switch
- Layer 2 , Layer 3
- IP version
- IPV4 , IPV6
- Switch Management
- RFC1213 SNMP , WEB base , CLI Command line , Telnet , SSHv2 , SSHv1
- Switch power consumption
- 2524-3000W
- Switch Capacity
- 51.2T
- Redundant power and fan
- Modular design of power supply and fan , hot swappable , fan speed control and alarm detection
16 other products in the same category
Specifications
Switch-Router | |
---|---|
Type of switch | Data center |
Number of ports | 2, 64 |
Port speed | 100G, 400G, 200G |
Uplink port | 64 |
Uplink Port speed | 400G |
type of ports | QSFP-DD |
type of uplink ports | QSFP-DD |
Power over Ethernet | No |
Layer of switch | Layer 2, Layer 3 |
IP version | IPV4, IPV6 |
Switch Management | RFC1213 SNMP , WEB base, CLI Command line , Telnet , SSHv2, SSHv1 |
Switch power consumption | 2524-3000W |
Switch Capacity | 51.2T |
Redundant power and fan | Modular design of power supply and fan, hot swappable, fan speed control and alarm detection |