Houper HOU-MDT836099 metal detector rocket has many uses in entrances and public places. It prevents the hot and cold weapons such as guns and knives to be carried into such places. Two rechargeable batteries is in the handheld metal detector rocket to provide the necessary energy for the operation of the device. This feature allows the metal detector rocket to be powered directly by charging the batteries without the need for an external power source. Sensitivity of handheld metal detector racket shows the responsiveness of the device in detecting various metals. The main purpose of having a sensitive metal detector rocket is accurate and reliable detection of various metals.

Schneider relay RSB2A080B7 is used in chillers and data center chillers. This relay has two open and closed contacts, which are controlled by 24 VAC, and 50 and 60 Hz frequency. It can pass 8 A current at an ambient temperature from -40 to +40 °C. The operating voltage of the relay is 19.2 to 36 VAC. Its nominal insulation voltage is 400 volts, and its instantaneous withstand voltage is 3.6 kV. The maximum voltage of the switch is 300 VDC and the minimum voltage of the switch is 12 volts. The RSB2A080B7 relay can operate 18,000 times per hour at no load, which decreases to 600 times per hour when under load. The operation time of RSB2A080B7 relay for activation and reset is 20 milliseconds. It is one of the important spare parts of Schneider machines in data centers.

WOW3163 is a thermometer based on NTC thermal resistance, which is used to measure the ambient temperature of various INROWs, including Schneider INROWACRC301S and INROWACRC602P. This operating piece converts temperature changes into current changes that can be understood by electronic circuits. Since it has a length of 2.5 meters, it can be installed at a relatively reasonable distance from an electronic circuit to measure heat. WOW3163 thermistor can measure the temperatures between -55 to +125. It is one of the important spare parts of Schneider machines in data centers.

W0W1314 is a thermometer based on NTC thermal resistance, which is used to measure the ambient temperature of various INROWs, including Schneider INROWACRC301S and INROWACRC602P. This operating piece converts temperature changes into current changes that can be understood by electronic circuits. Since it has a length of 0.5 meters, it should be installed at a very short distance from an electronic circuit to measure heat. W0W1314 thermistor can measure the temperatures between -55 to +125. It is one of the important spare parts of Schneider machines in data centers.

W0W2818 is a thermometer based on NTC thermal resistance, which is used to measure the ambient temperature of various INROWs, including Schneider INROW ACRC301S and Schneider INROW ACRC602P. This operational component converts temperature changes into current changes that can be understood by electronic circuits. Since it has a length of 4 meters, it can be installed at a relatively reasonable distance from the electronic circuit to measure heat. W0W2818 thermistor can measure the temperature between -55 to +125. It is one of the important spare parts of Schneider machines in data centers.

The continuous and accurate measurement of temperature and humidity is very important due to the high sensitivity of data centers environment to temperature and humidity. Therefore, with very accurate measuring devices, the necessary signals are always given to the system for the required controls. The W0N-0865 humidity sensor is used in the Schneider brand INROW ACRC602P cooler. It can be installed on a special base. This sensor converts the humidity of the environment into an electrical signal. It provides control circuits to adjust the humidity of the environment by activating or deactivating the fans. The cable length of the sensor is about 2.5 meters.

The continuous and accurate measurement of temperature and humidity is very important due to the high sensitivity of data centers environment to temperature and humidity. Therefore, with very accurate measuring devices, the necessary signals are constantly given to the system for the required controls. The W0N-0297 humidity sensor is used in the Schneider brand INROW ACRC602P cooler. It can be installed on a special base. This sensor converts the humidity of the environment into an electrical signal. It provides control circuits to adjust the humidity of the environment by activating or deactivating the fans. The cable length of the sensor is about 0.5 meters.

Houper Metal detection device, part number HOU-MDT836103-4, has many uses in entrances and public places. It can prevent contaminated materials, narcotics, and cold and hot weapons such as guns and knives to be carried into such places. Substance detection devices in public places usually use technologies such as odor detection, radio wave detection, and X-ray detection. High sensitivity in the material detection device means the detection of the smallest amount of substance. This feature allows the detection of substances at very low and sensitive levels which is not doable by other equipment. The high-speed VUV light soft ionization technique is used in the substance detection device. This technique uses a VUV light to produce very high infrared rays.

Houper shoe metal detector, part number HOU-MDT836102, can be widely used in entrances and public places. It prevents the hot and cold weapons such as guns and knives to be carried into such places. It is small in size and easy to use. It is also used to detect small metal objects such as needles and sewing needles. In addition, by using various technologies, including metal detectors, and sound and video intensifiers, it can accurately and quickly identify metal objects in shoes. It has a simple interface feature for users. In the shoe security check device, this feature allows the user to easily understand and use the device without the need for technical knowledge.

Houper HOU-MDT836101 metal detection rocket is important in mining industry in looking for metals. It has many uses. Its system includes an electronic device that can accurately detect metals using electromagnetic waves and special sensors. The working principle of the system is based on measuring the changes of magnetic field created by metals. In the handheld metal detector racket, Ground Balance Controls allow the user to adjust the level of ground effect. The controls usually have several modes allowing the user to change the sensitivity to ground signals. Disc Control allows the user to distinguish various types of metals from each other. By adjusting the control, the user can select the metals they are looking for, and exclude other metals.

Houper HOU-MDT836100 metal detector rocket has many uses in entrances and public places. It prevents the hot and cold weapons such as guns and knives to be carried into such places. Damp-proof sensitivity adjusting feature of Gates manual metal detector rocket allows the user to adjust the sensitivity to humidity. If the battery drop down to a low voltage, it may show some errors, and it may not function properly. With an independent low voltage battery system, the device can function properly even when the battery voltage drops to a low level. Another important feature of Gates manual metal detector rocket is its shield. This means that the device has a protective cover that prevents electromagnetic interference and other electronic noise.

Houper HOU-MDT836098 metal detector rocket has many uses in entrances and public places. It helps us to prevent the hot and cold weapons such as guns and knives to be carried into such places. The weight of the device is only 220 g. and its length is 37 cm. Other features of the rocket include sensitivity and search depth setup, LED lighting for use in low light conditions, display of necessary information and warnings. The rocket could be adjusted in three different speeds, which allows the user to operate it in different conditions, and adjust its performance according to his needs. In addition, the rocket is designed in a way that allows the user to use it comfortably and easily. The handle of the device is ergonomic. It is made in an optimal way using advanced design technologies.