The Cummins L9N EURO VI engine is a powerful and advanced engine designed for use in buses and heavy trucks in Europe.

The power of the engine is between 280 to 320 hp and the output power is 209 to 239 kW. The maximum torque of the engine is 1000 lb-ft or 1356 Nm.

Cummins L9N EURO VI FOR EUROPE engine has been able to meet the strict European environmental standards with the help of advanced EURO VI technology. By using this engine, it is possible to reduce air pollution and the discharge of dangerous gases such as nitrogen oxide and suspended particles.

In addition, it has high safety standards and advanced capabilities such as electronic control, and monitoring systems. With its long life and high durability, the engine is an ideal choice for the heavy transport vehicles.

Cummins ISL FOR EURO TRUCK & BUS engine is one of the best and most powerful engines available for trucks and buses in Europe. The engine has been designed and built using advanced technologies and high quality components to provide unparalleled performance in tough driving conditions.

It has a power between 206 and 395 hp (154 and 295 kW), supporting an excellent performance and increased power in heavy vehicles such as trucks and buses.

In addition, the Cummins ISL FOR EURO TRUCK & BUS engine has a torque range of 1143 to 1260 lb-ft (1550 to 1708 Nm), which shows its power and ability to pull and carry heavy loads.

HOP28110 is a professional bidirectional trans-coder to convert video between H.264 and MPEG-2 format and also to trans-code between HD and SD programs simultaneously. It is equipped with 6 tuner inputs to receive channels directly from satellite, or 6 ASI /8 IP inputs to receive digital channels. (HOP28110.1 is a simple version with 4 Tuners only or 4 ASI inputs only without IP input.) After trans-coding, it outputs MPTS & SPTS through the DATA port or ASI port.

HOP28109 network encoder (Network Encoder Processor) is an encoding device for IP broadcasting. It is equipped with 8/16/24 HDMI channels input with MPEG-4 AVC/H.264 video encoding and LC-AAC or HE-AAC audio encoding. The signals source could be from STB, PC, TV and etc. It can transfer the live program through the internet/LAN, and gives IP out over UDP (Unicast/Multicast), SRT, RTSP, RTMP, HTTP and HLS, and the output signals are to be received by PC, phone and other mobile terminals. HOP28109 you access your IP STB, PC or TV anywhere to watch your programs.

Houper HOP28108 encoder is a Multi-Channel Encoder that converts HDMI and SDI input signals to IP. This advanced equipment has the ability to convert several HDMI and SDI channels to one or more IP channels. In addition, the device has the ability to convert all types of audio and video protocols to each other. It is capable of intelligently reducing noise, OSD and logo insertion in Full HD quality, compressing images and sounds, reducing bandwidth by 75%.

The Cummins GTA38GCE GAS COMPRESSION APPLICATIONS is a powerful engine for gas compression applications with an output power of 760 hp or 567 kW. It is used in industrial applications related to gas pressure, especially in oil, gas and petrochemical industries.

As a gas engine, Cummins GTA38GCE is used to compress natural, industrial, and other types of gases. With high power and strong performance, it is capable of creating high pressure in gases, and providing energy for various processes in industries.

Using advanced and reliable gas pressure systems, it provides its users with high power and performance, economic efficiency, and stability in operation.

HOP28107 is a cost-effective agile modulator designed by Houper. It has 1 audio (L/R) and 1 video (CVBS) input. It gives 1 RF out (47~870MHz) through the RF output interface, and the output frequency is configurable. Audio and video source can be from satellite receiver, TV camera etc. With the features of low cost high performance, HOP28107 is very adaptable to hotel, community and entertainment spot.

Cummins X15 PERFORMANCE SERIES (2021) engine is one of the top and advanced products of Cummins Company. Thanks to the superior technologies used in this engine, it is able to provide unparalleled performance.

The engine is one of the powerful products of the Cummins Company. It can provide a very strong and powerful performance by a power between 525 and 565 hp and 391 and 421 kW. In terms of torque, the engine can produce a torque between 1,650 and 2,050 lb-ft and 2,237 and 2,779 Nm.

In addition, the X15 engine has advanced control and monitoring systems that allow users to accurately view and control the its performance.

HOP28105 DVB-T/T2 modulator is our new product developed complying with the DVB-T/T2 standard. With its advanced modulating technology, this modulator can effectively make use of the ground spectrum resources and make it possible to provide reliable signals for fixed, mobile and portable devices. Compared with DVB-T, the channel capacity is increased by 30% under the similar carrier to noise ratio (CNR) threshold.
Moreover, this device can be upgraded and controlled through network system, which allows it to be widely used in setting up digital broadcasting network and provide good signals for scientific laboratory and DVB-T/T2 STB.

The HOP6865-56YC switch has 48 ports with 25G of capacity and 8 ports with 100G of capacity. The switch is made by HOUPER Company. It is one of the HOP6865 series core switches. 4T switching capacity for large networks makes it possible to meet the requirements of extremely high bandwidth usage for special applications. The support of rich service features, L2, L3, MPLS, VxLAN, OAM/APS and security features and the modular design of the device in choosing the number of fans and power convince any network manager to use this wonderful equipment in their core network. 

HOP28111 is a professional bidirectional trans-coder to convert video between H.264 and MPEG-2 format and also to trans-code between HD and SD programs simultaneously. It is equipped with 4 tuner inputs to receive channels directly from satellite. And, each tuner is accompanied with a CAM/CI slot to descramble the encrypt content.
In addition, IP content can also be received and trans-coding processed. HOP28111.1 will at last output MPTS & SPTS through the DATA port (net port) or ASI port.

Houper HOP28130 is a DVB S2/T/C to IP MPTS device that enables conversion of DVB S2/T/C digital signals to IP MPTS format. DVB S2/T/C indicate satellite (DVB S2), digital terrestrial television (DVB T) and cable (DVB C).  In this process, digital signals received via satellite, terrestrial or cable are converted into IP MPTS format. With multiple and unique features, this device has 24 DVB inputs of different types, and a gigabit IP output. It is a unique and very cost effective IPTV solution for various projects including mega malls, residential buildings and cities.