HOP6862-54XC açarında 10G tutumlu 48 port, 40G tutumlu 2 port və 100G tutumlu 4 port var. Açar HOUPER şirkəti tərəfindən istehsal olunur. HOP6862 seriyalı əsas təbəqə açarlarından biridir. Bu, məlumat mərkəzləri və böyük təşkilatlar kimi xüsusi proqramlara cavab vermək üçün 1,92T-ə qədər kommutasiya qabiliyyətini təmin edən fövqəl\'adə bir avadanlıqdır. Bu, bütün növ marşrutlaşdırma və açar protokollarını dəstəkləyən Layer 3 açardir. Cihazın modul dizaynı bu cihazı homojen və şəbəkənizlə uyğunlaşdırmağa kömək edir. Bu açarin son dərəcə yüksək təhlükəsizliyi onu xüsusi şəbəkələrdə quraşdırmağa imkan verir.

HOP28114 8in1/16in1 ISDB-T modulator is the latest generational Mux-modulating device developed by HOUPER. It has 8 (or16) multiplexing channels and ISDB-T modulating channels, and supports maximum 512 IP input through the 3 GE ports and 8 (or16) ISDB-T non-adjacent carriers (50MHz~960MHz) output through the RF output interface. The device is also characterized with high integrated level, high performance and low cost. This is very adaptable to newly generation DTV broadcasting system.

HOP28105 DVB-T/T2 modulator is our new product developed complying with the DVB-T/T2 standard. With its advanced modulating technology, this modulator can effectively make use of the ground spectrum resources and make it possible to provide reliable signals for fixed, mobile and portable devices. Compared with DVB-T, the channel capacity is increased by 30% under the similar carrier to noise ratio (CNR) threshold.
Moreover, this device can be upgraded and controlled through network system, which allows it to be widely used in setting up digital broadcasting network and provide good signals for scientific laboratory and DVB-T/T2 STB.

HOP28112 Tuner to IP Gateway is a head-end interface conversion device which supports MPTS and SPTS output switchable. It supports 24 MPTS+2 MPTS(ASI and USB) or 1024 SPTS output over UDP and RTP/RTSP protocol. It is integrated with tuner demodulation (or ASI input) and gateway function, which can demodulate the signal from 24 tuners into IP package, or directly convert the TS from ASI input and tuner into IP package, then output the IP package through different IP address and ports. BISS function is also embedded for tuner input to descramble your tuner input programs.

The Cummins L9N EURO VI engine is a powerful and advanced engine designed for use in buses and heavy trucks in Europe.

The power of the engine is between 280 to 320 hp and the output power is 209 to 239 kW. The maximum torque of the engine is 1000 lb-ft or 1356 Nm.

Cummins L9N EURO VI FOR EUROPE engine has been able to meet the strict European environmental standards with the help of advanced EURO VI technology. By using this engine, it is possible to reduce air pollution and the discharge of dangerous gases such as nitrogen oxide and suspended particles.

In addition, it has high safety standards and advanced capabilities such as electronic control, and monitoring systems. With its long life and high durability, the engine is an ideal choice for the heavy transport vehicles.

Cummins ISL FOR EURO TRUCK & BUS engine is one of the best and most powerful engines available for trucks and buses in Europe. The engine has been designed and built using advanced technologies and high quality components to provide unparalleled performance in tough driving conditions.

It has a power between 206 and 395 hp (154 and 295 kW), supporting an excellent performance and increased power in heavy vehicles such as trucks and buses.

In addition, the Cummins ISL FOR EURO TRUCK & BUS engine has a torque range of 1143 to 1260 lb-ft (1550 to 1708 Nm), which shows its power and ability to pull and carry heavy loads.

HOP28110 is a professional bidirectional trans-coder to convert video between H.264 and MPEG-2 format and also to trans-code between HD and SD programs simultaneously. It is equipped with 6 tuner inputs to receive channels directly from satellite, or 6 ASI /8 IP inputs to receive digital channels. (HOP28110.1 is a simple version with 4 Tuners only or 4 ASI inputs only without IP input.) After trans-coding, it outputs MPTS & SPTS through the DATA port or ASI port.

HOP28109 network encoder (Network Encoder Processor) is an encoding device for IP broadcasting. It is equipped with 8/16/24 HDMI channels input with MPEG-4 AVC/H.264 video encoding and LC-AAC or HE-AAC audio encoding. The signals source could be from STB, PC, TV and etc. It can transfer the live program through the internet/LAN, and gives IP out over UDP (Unicast/Multicast), SRT, RTSP, RTMP, HTTP and HLS, and the output signals are to be received by PC, phone and other mobile terminals. HOP28109 you access your IP STB, PC or TV anywhere to watch your programs.

Houper-in HOP28108 kodlayıcısı HDMI və SDI giriş siqnallarını IP-yə çevirən Çox Kanallı Kodlayıcıdır. Bu ali avadanlıq bir neçə HDMI və SDI kanalını bir və ya bir neçə IP kanalına çevirmək imkanına malikdir. Bu avadanlıqdan istifadə etməklə müxtəlif mənbələrdən olan videolari eyni vaxtda müxtəlif video sistemlərə köçürmək olar. Həmçinin, bu cihaz bütün növ audio və video protokolları birlikdə çevirmək qabiliyyətinə malikdir. Bu cihaz ağıllı şəkildə Full HD keyfiyyətində səs-küyü, OSD-ni azaltmaq və loqo daxil etmək, şəkilləri və səsləri sıxışdırmaq, bant genişliyini 75% azaltmaq qabiliyyətinə malikdir.

The Cummins GTA38GCE GAS COMPRESSION APPLICATIONS is a powerful engine for gas compression applications with an output power of 760 hp or 567 kW. It is used in industrial applications related to gas pressure, especially in oil, gas and petrochemical industries.

As a gas engine, Cummins GTA38GCE is used to compress natural, industrial, and other types of gases. With high power and strong performance, it is capable of creating high pressure in gases, and providing energy for various processes in industries.

Using advanced and reliable gas pressure systems, it provides its users with high power and performance, economic efficiency, and stability in operation.

HOP28107 is a cost-effective agile modulator designed by Houper. It has 1 audio (L/R) and 1 video (CVBS) input. It gives 1 RF out (47~870MHz) through the RF output interface, and the output frequency is configurable. Audio and video source can be from satellite receiver, TV camera etc. With the features of low cost high performance, HOP28107 is very adaptable to hotel, community and entertainment spot.

Cummins X15 PERFORMANCE SERIES (2021) engine is one of the top and advanced products of Cummins Company. Thanks to the superior technologies used in this engine, it is able to provide unparalleled performance.

The engine is one of the powerful products of the Cummins Company. It can provide a very strong and powerful performance by a power between 525 and 565 hp and 391 and 421 kW. In terms of torque, the engine can produce a torque between 1,650 and 2,050 lb-ft and 2,237 and 2,779 Nm.

In addition, the X15 engine has advanced control and monitoring systems that allow users to accurately view and control the its performance.