مولد ديزل الكمینز 625 كيلو فولت أمبير C625D5P

Reliable Technology And Unmatched Performance 

• The Cummins® K19 series rugged engine and world class Stamford alternator powered diesel generator set 

•  Proven technology with mechanical simplicity of Cummins PT fuel system.

• Smart aesthetic and superior finish 

• Compact in size with optimum power to weight ratio

Environment Friendly Power  

• Class defining technology engine is designed to meet stringent exhaust emission tests as per revised MoEF norms, thus offering environment friendly power. 

• The Cummins® diesel generator sets are available with the lowest noise levels in its range

Lowest Operating Cost and Comprehensive Warranty 

• Highly reliable and durable product 

• All elements are designed to work together to maximize efficiency even at part loads, offering the advantage of lowest operating costs. 

• 300 Hours/ 1 year service interval 

• Industry acknowledged best-in-class comprehensive warranty on the entire package including rubber components

Single Source Power Assurance 

• All the major components – the engine, alternator, control system and canopy are designed, manufactured and tested by Cummins India. 

• Best and largest customer support network in India, 

• Capable of providing round-the-clock service and spares support 

• All these things put together, Cummins® offers you SINGLE SOURCE POWER ASSURANCE

Engine 

• Cummins® K19 series, 6 cylinder, In-line 4 stroke, radiator cooled engine 

•  Highly stable and reliable design with square engine

• Well designed air handling system with 

— Dry type, Replacable paper element air cleaner with restriction indicator 

 — Air to air aftercooling 

— Optimised turbocharger for increased altitude capabilities 

• Best in class fuel economy with 

-  PT fuel system with Electronic Step Timing Control (ESTC) injectors which smoothly stabilise engine speed under load with A1 class Electronic governing

• Standard integral set-mounted radiator system, designed and tested for 50°C ambient temperatures 

• Venturi combo Spin On Oil Filter

• Plate type lube oil cooler 

• First fill of lube oil and coolant 

• Electrical starter motor with soft start engagement feature 

• Battery charging alternator 

• 2 X 12 V DC battery

Alternator 

• Stamford HC alternator frames from cummins Generator Technologies  

• Brushless type, Screen protected, Revolving field, Self excited alternator conforming to IS/IEC 60034-1

• 3 Phase reconnectable winding with 12 terminals brought out for connection   

• Better motor starting capability 

• Best in class efficiency 

• Compact design with sealed bearings for longer life and lesser maintenance  

• Impregnation on all wound components for better mechanical strength  

Control Panel 

Control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the following parts: 

• Power Command 3.3 Controller 

• Aluminum bus bars with suitable capacity with incoming/ outgoing terminals 

• Instrument fuses duly wired and ferruled

• Air Circuit Breakers (ACBs)/Moulded Case Circuit Breaker (MCCB) of suitable rating with overload and short circuit protections

PowerCommand 3.3 features 

The PowerCommand control system is a microprocessorbased generator set monitoring, metering and control system with LCD display designed to meet the demands of today’s engine driven generator sets

• Intuitive operator interface which includes LED backlit LCD display with tactile feel soft-switches & generator set status LED lamps 

• Integrated digital AVR for shunt or PMG excitation with torque matching. 

• Digital electronic governing with temperature compensation and smart starting.. 

• Remote start-stop 

• Engine metering: Oil pressure, High coolant temperature, Low coolant level, Battery voltage, Engine speed and hours. 

• AC Alternator metering: L-L Voltage and L-N Voltage, Current (1 and 3 phase), Volt-Amperes (phase and total) and Frequency. 

• Utility/AC bus Metering: L-L Voltage and L-N Voltage, Current (1 and 3 phase), kW, kVAR, Power factor, kVA (three phase and total), and Frequency. 

• Paralleling Control Functions: Digital frequency synchronization and voltage matching, Isochronous kW and kVAr load sharing controls, Droop kW and kVAr control, Sync check, Extended paralleling (Peak Shave/Base Load), Load govern control, Load demand control. 

• AC Alternator protection: Over/Under voltage, Over/Under frequency, Over current, Short circuit and Loss of AC sensing. 

• Data logging: Engine hours, Control hours, Engine starts and upto 10 recent fault codes 

• Engine Protection: Low lube oil pressure, High/Low coolant temperature, Over speed, Battery Over/Under/Weak Volts, Fail to crank/start, Cranking lockout, Low fuel level, Sensor failure.

• Utility/AC bus protection: Over/Under voltage, Under frequency and Phase rotation

• Paralleling protections  

• Control Functions: Start-stop with configurable time delay, Real time clock for fault and event time stamping, Exerciser clock and time of day start/ stop, Configurable glow plug control, Configurable cycle cranking, Load shed/ dump as per configurable priority

• 12 and 24 Volt DC operation 

• Sleep mode 

• Programmable I/Os (4 inputs and 4 outputs), expandable with AUX101/102 modules

 • Self-Configuring PCCNet network

• Modbus interface (RS485 RTU) 

• InPower compatible (PC based service tool) 

• Certifications - meets the requirement of relevant UL, NFPA, ISO, IEC, Mil Std., CE and CSA standards

Silencer 

•  Hospital grade silencer with rain cap suitably optimised to meet stringent noise emission standards laid down by MoEF / CPCB

Mounting Arrangement 

• Engine and alternator are mounted on a common MS fabricated base frame with AVM pads.  

• Base frame with integral fuel tank is provided with drain plug, air vent, inlet and outlet connection, level indicator and provision for cleaning

Optional 

• Engine: Coolant heater, Heat exchanger 

• Alternator: PMG

• Control Panel: Microprocessor / relay based AMF control panel

•   Others: Trolley mounted mobile sets

Acoustic Enclosure 

• Specially designed to meet stringent MoEF/ CPCB norms of 75 dBA @ 1mtr at 75% load under free field conditions  

• The acoustic enclosure is made of CRCA sheets in munsel green shade and a structural/ sheet metal base frame painted in black.  

• High quality noise absorbant and fire-retardant grade acoustic Insulation material (P.U. Foam) complying to IS 8183 

• Two point lifting for easy handling at customer site

• Designed to have optimum serviceability 

• Air inlet louvers specially designed to operate at rated load  

• Made on special purpose CNC machines for consistency in quality and workmanship  

• 11 tank pretreatment process and UV resistant Powder Coating of all parts to withstand extreme environment  

• Use of special hardware for longer life  

• Flush styling - no projections  

• Fluid drains for lube oil and fuel 

• Fuel filling arrangement inside the enclosure